EssentialsLesson 5 of 5 · 5 steps

Choose your builder and available tools

Set up the builder, modules, and tool access needed for your task.

Video coming soon

Your next step is ready.

Follow the complete written guide below.
The video will join it here when it’s ready.

Start the written lesson

Before you start

An installed EMCP plugin.
Your chosen builder and required plugins active.

Let’s do this, step by step.

Step 01

Select your builder

Open EMCP Tools → Setup → Page Builders. Under 1. Standalone builder choose a Detected card, or Use Gutenberg only. Choose Save changes.

Choose one supported builder and click Save changes. A Not detected card explains what is missing. This selects the tools; it does not convert your pages.

Step 02

Enable block packs separately

Under 2. Gutenberg block plugins, switch on the installed packs you need and choose Save changes.

Block packs have independent switches. You can use more than one beside your selected builder. Save the changes before moving on.

Step 03

Review modules

Open Setup → Modules. Find the feature in Content & design, AI & agents, or Site & safety. Switch it on and choose Save modules. After the reload, use Settings and Save settings for any separate options.

Modules turn whole features on or off. Click Save modules after changing a switch. Some cards have a separate Settings drawer with its own save button. Themer starts off on new installations.

Step 04

Choose individual actions

Open Setup → Tools. Select the builder, pack, WordPress, Plugins, Themes, Gutenberg, or EMCP Modules tab. Use search, risk and Status filters. Enable needed tools and choose Save changes.

A Needs badge tells you which dependency is missing. Many powerful actions, including Pro tools, start off on a fresh installation. Check the actual switches. EMCP Modules here is a tools tab; the separate Modules screen controls whole features.

Step 05

Reconnect and inspect

Reconnect the AI app. If the catalog is too large, try Compact tool mode, save, and reconnect again.

Compact mode presents three entry points that let the AI find the same enabled actions. Three tools can be perfectly normal; zero tools needs a different check.

You’re done when…

Your selected builder and required actions are available after reconnecting.

Keep the reference handy.

The docs cover tool details and requirements for this lesson.